"Risk Assessment Best Practices in the Design Phase" - Webinar - Electrical Business Magazine/iGard

Jan 14, 2017
3
0
1
#1
Webinar as presented by Electrical Business Magazine and sponsored by iGard.

Using some of the best practices from the "Risk Assessment Procedure" principles from CSA Z462-15 as bench-marked from CAN/CSA-Z1002-12 - Occupational health and safety - Hazard identification and elimination and risk assessment and control.

Discovering potential equipment and safe work practices weakness in the design phase using credible and efficient methodologies where they are easy to correct will bring a far safer workplace and much greater ROI to resources available to your business units.

[https://www.ebmag.com/webinars/risk-assessment-best-practices-in-the-design-phase-18824]